OGL Single Prong Copper Garrison Buckle Leather Belt - NaturalOGL-BELT-COP-NAT Seasonal or Limited Run
Natural leather belt with ellipse punch holes and a single prong solid copper garrison buckle - handmade by our good friends Obbi Good Label in Singapore. Constructed with 12oz full-grain cowhide leather, which will age naturally with unique characteristics. Whilst shiny when new, due to the nature of copper, the buckle will darken over time as the metal begins to oxidise.
- Made by our friends Obbi Good Label at their workshop in Singapore
- 12oz vegetable tanned cowhide leather
- Natural, undyed
- 0.16" thick (4mm)
- 1.5" wide (3.8cm)
- Ellipse punch holes
- Solid copper garrison buckle with a single prong
- 5 Hole positions
- Debossed OGL logo
- 'OGL Works' brass screw-post for future adjustment
All measurements are specific to this product. The best way to determine the size you need is to find a similar item that fits you well, then measure the same way we do (see "How We Measure" tab) and compare with the measurements on the table below. Actual measurements for the same Iron Heart item/tag size can vary somewhat so if a specific dimension is important to you (for example arm length) please ask us to check this before we ship by adding a note to your order. Measurements for raw denim garments are pre-soak (allowance must be made for shrinkage).
|Base of Buckle Prong to 1st Hole||32.081.3||33.785.6||35.790.7||37.896.0||41.0104.1|
|Base of Buckle Prong to 3rd (Middle) Hole||34.086.4||35.790.7||37.795.8||39.8101.1||43.0109.2|
|Base of Buckle Prong to 5th (Last) Hole||36.091.4||37.795.8||39.7100.8||41.8106.2||45.0114.3|